carb insolarter boot

A place to discuss matters related to Honda Helix scooters.

carb insolarter boot

Postby scootcat » Sun Jun 02, 2019 6:24 am

It goes between carb and head,is there different sizes? My air filter tube does not reach it.
scootcat
 
Posts: 37
Joined: Sat Jul 21, 2018 12:21 pm

Re: carb insolarter boot

Postby zozman » Sun Jun 02, 2019 1:26 pm

Hello.

The carb insulator boot only comes in one size.

Did you buy the OEM Honda insulator?

Somtimes you have to work with them to get the air horn aligned just right so it fits on the front of the carburetor. I have to adjust the carburetor just right to get all the parts to go back together again!

The difficult part is getting the air horn (milky white tube) into the air box. Sometimes the right fit is not always the tight fit.

zoz
87 & 98 Helix
zozman
 
Posts: 509
Joined: Sat Aug 01, 2009 10:59 am

Re: carb insolarter boot

Postby scootcat » Sun Jun 02, 2019 3:05 pm

1986ch250, I am no sure if OEM, I bought a couple of years ago thank you so much, I will see what I can do, I like it because it lighter then the helix.
scootcat
 
Posts: 37
Joined: Sat Jul 21, 2018 12:21 pm

Re: carb insolarter boot

Postby zozman » Sun Jun 02, 2019 6:50 pm

16210-KM1-010 is the same for all 1985-88 CH 250s and all CN250s.

ASSEMBLIES WHERE 16210-KM1-000 IS USED
1985 CH250 A - CYLINDER HEAD
1985 CH250 AC - CYLINDER HEAD
1986 CH250 A - CYLINDER HEAD
1986 CH250 AC - CYLINDER HEAD
1986 CN250 A - CYLINDER HEAD
1986 CN250 AC - CYLINDER HEAD
1987 CH250 A - CYLINDER HEAD
1987 CH250 AC - CYLINDER HEAD
1987 CN250 A - CYLINDER HEAD
1987 CN250 AC - CYLINDER HEAD
1988 CH250 A - CYLINDER HEAD
1988 CH250 AC - CYLINDER HEAD
1992 CN250 A - CYLINDER HEAD
1993 CN250 A - CYLINDER HEAD
1994 CN250 A - CYLINDER HEAD
1995 CN250 A - CYLINDER HEAD
1996 CN250 A - CYLINDER HEAD
1997 CN250 A - CYLINDER HEAD
1985 CH250 A - CYLINDER HEAD
1985 CH250 AC - CYLINDER HEAD
1986 CH250 A - CYLINDER HEAD
1986 CH250 AC - CYLINDER HEAD
1986 CN250 A - CYLINDER HEAD
1986 CN250 AC - CYLINDER HEAD
1987 CH250 A - CYLINDER HEAD
1987 CH250 AC - CYLINDER HEAD
1987 CN250 A - CYLINDER HEAD
1987 CN250 AC - CYLINDER HEAD
1988 CH250 A - CYLINDER HEAD
1988 CH250 AC - CYLINDER HEAD
1992 CN250 A - CYLINDER HEAD
1993 CN250 A - CYLINDER HEAD
1994 CN250 A - CYLINDER HEAD
1995 CN250 A - CYLINDER HEAD
1996 CN250 A - CYLINDER HEAD
1997 CN250 A - CYLINDER HEAD
1998 CN250 A - CYLINDER HEAD
1999 CN250 A - CYLINDER HEAD
87 & 98 Helix
zozman
 
Posts: 509
Joined: Sat Aug 01, 2009 10:59 am

Re: carb insolarter boot

Postby scootcat » Sun Jun 02, 2019 8:00 pm

Thanks again zoz, you DA man!
scootcat
 
Posts: 37
Joined: Sat Jul 21, 2018 12:21 pm


Return to Honda Helix

Who is online

Users browsing this forum: No registered users and 1 guest